banner
banner
banner
BT-PON GEPON FTTX CATV SOLUTION 拷贝
TOWER SOLUTION 拷贝
mob.3
mob.2
mob.1

Featured Products

Shanghai Fibercloud Communication Technology Co., Ltd. Fibercloud is an optical communication solution provider of optical fibers, optical cables, special optical fibers, special optical cables.
YOFC G654 FarBand® Cut-off Shifted Single-mode Optical Fibre
YOFC FarBand® fibre is designed specially for long-haul optical transmission systems. It makes performance optimization in both C band (1530-1565nm) and L band (1565-1625nm). Its enlarged effective area suppresses nonlinear effect in the process and increases nonlinear tolerance for transmission system. Meanwhile FarBand® fibre reduces attenuation in both C band and L band. The fibre fully meets the demands for transmitting signal with high speed, high capacity and extended networking distances over one single fibre.
Characteristics
  • Designed for 40G/100G/ 100G beyond large capacity, long haul Dense Wavelength Division Multiplexing (DWDM) system operation over C band (1530-1565nm) and L band (1565-1625nm)
  • Large effective area reduces nonlinear effect in the transmission process, ensuring good system performance
  • Lower attenuation level, which meets the demand of extended long distance transmission
  • Lower bending induced loss at 1550nm and more sensitive 1625 nm window
View More
272um Holmium Fluorine-Doped Cladding SMA905 Laser Medical Optical Fiber Pigtail
Holmium laser therapy uses a krypton flash light source to activate the rare element holmium embedded in yttrium-aluminum-garnet crystals to produce a pulsed laser. It uses holmium laser lithotripsy technology, which has the effects of cutting, vaporization, and hemostasis. It can crush any hard urinary stones without harming the body's soft tissues. The stone crushing rate of a single operation exceeds 95%, making it the gold standard for lithotripsy in the new era.
Holmium laser fiber can be used in devices and systems operating at a wavelength of 2.14μm. Fiber core diameters ranging from 200μm to 600μm can provide high coupling efficiency in data connections or other connectors.
Characteristics
  • Large fiber core diameter can provide LED and laser light sources
  • Higher coupling efficiency
  • Adapt to a wider range of temperature and humidity changing application environments
  • Excellent fatigue resistance
  • Excellent radiation resistance
  • Biocompatible
View More
Underwater Repeatered Long Haul Ocean Communication Spiral Armored Fiber Optic Submarine Cable
The repeatered submarine optical fibre cable communication system includes one or more repeaters, applicable to long haul, high speed, cross-ocean communication system.
Characteristics
  • Executive standards: GB/T 18480, GJB 4489, IEC 60794, ITU-T G.976
  • Scope of application: laid in oceans and rivers; used for communication and data transmission between continents, between continents and islands, and between islands and islands, featuring large transmission capacity and long continuous length; applicable to long haul, high speed, cross-ocean communication system, with repeaters up to 16 fibre pairs.
  • Temperature range: operating temperature: -10°C to +40°C; handling temperature: -15°C to +45°C; storage temperature: -30°C to +60°C
  • Normal service life: no less than 25 years
  • Maximum laying depth under water: 8,000m
View More
Small Size Bow-Type Drop Cable(GJXH) Fiber Optic Cable

The typical GJXH bow-type drop optical cable includes central optical fibre(s) with 2 parallel steel wires as the strength members placed on both sides
a LSZH sheath is extruded outside.

Characteristics

  • Simple structure and light weight
  • Good strippability for easy splice,installtion and maintenance
  • LSZH sheath ensures the flame retardant performance
View More
Ai-6c Fiber Optic Handheld Fusion Splicer Machine for FTTH
Signal Fire AI-6A use the latest core alignment technology with auto focus and six motors. Qualified with trunk construction of medium and short distance, FTTH project, security monitoring and other fiber cable splicing projects.
Characteristics
  • With 5-inch 800X480 high-resolution screen, up to 300 times focus magnifications
  • Unique lighting design convenient for night construction or repair
  • Screen brightness is adjustable convenient for outdoor sunshine environment operation
  • Aviation metal body material 
View More
Customized Duplex OS2 Single Mode LC SC FC ST LSH MU MTRJ Upc Fiber Optic Patch Cord Cable
The 9/125μm OS2 single mode bend insensitive fiber optic cable has less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It can also save more space for your high-density cabling in data centers, enterprise networks, telecom rooms, server farms, cloud storage networks, and interconnect pre-terminated cassettes in main distribution, horizontal distribution, and equipment distribution areas.
This 9/125 OS2 single mode fiber optic cable is ideal for connecting 1G/10G/25G/40G/100G/400G Ethernet connections. It can transport data for up to 10km at 1310nm, or up to 40km at 1633nm.
Characteristic
  • Low Insertion loss
  • High return loss
  • Good Repeatability
  • Good Interchange
  • Excellent Environmental Adaptability
     
View More
CE RoHS FC Upc 2-15dB Male and Female Flange Connector Fiber Optic Attenuator
As an optical passive device, the optical fiber attenuator is used to debug optical power performance in optical communication systems, debug the calibration and correction of optical fiber instruments, and attenuate optical fiber signals. The product is made of attenuated optical fiber doped with metal ions, which can adjust the optical power to the required level. The fixed attenuator is an optical device that can reduce the energy of optical signals. It is used to attenuate the input optical power and avoid the distortion of the optical receiver caused by the excessive input optical power. Fibercloud's fixed attenuator products include six models: 2dB, 3dB, 5dB, 7dB, 10dB and 15dB.
Characteristic
  • Optional attenuation value:2dB, 3dB, 5dB, 7dB, 10dB and 15dB
  • Communication band:1260-1625nm
  • Easy-to-install plug-in construction
  • Diverse plug types
  • Zirconia core:accurate attenuation and high return loss
  • STANDARD:GR-1221-CORE, GR-1209-CORE
  • RoHS compliant
  • Telcordia(bellcore)GR-468-CORE reliability compliant
  • Operating temperature -40 to +85ºC
  • Plug and unplug>1000 time
View More
LSZH 1X2 2.0mm SC/APC Box Type Single Mode Simplex Fiber Optic Pigtail PLC ABS Fiber Splitter
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. Blockless PLC splitter has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It's mainly used for various connection and distribution boxes or network cabinets.
Characteristic
  • PLC fiber splitter 1x 2
  • ABS box package
  • 0.9/2.0/3.0mm input/output fiber cable
  • Single-mode fiber SMF-28e
  • Customized input/output fiber cable length
  • SC, LC, FC, ST connectors for option
  • APC, UPC polished fiberoptic connectors available
  • Good uniformity and directivity
  • Low insertion loss and low PDL
  • High reliability
  • Wide wavelength range
View More
1550nm 16/32 Port CATV EDFA Optical Fiber Amplifier
 The Optical Fiber Amplifier is a specialized device designed to amplify optical signals in Cable Television (CATV) and broadband fiber networks. Operating at the 1550nm wavelength, it utilizes Erbium-Doped Fiber Amplifier (EDFA) technology to boost signal strength without converting optical signals to electrical form. With 16 or 32 output ports, it supports multi-point signal distribution efficiently. Key advantages include high output power, low noise figure, and exceptional signal stability over long distances. This amplifier is critical for extending the reach of CATV systems, enabling seamless transmission of high-definition video and data services across extensive fiber optic infrastructures, such as metropolitan networks or large-scale residential deployments.
Characteristics
  • Adjustable Output Power: Range of -3 to +6dB 
  • Built-in 1310/1490/1550nm splitters for EPON/GPON compatibility
  • Hot-Swappable PSU, Dual-Power Redundancy
  • Automatically shuts down pumps at >50°C and reactivates when cooled below 50°C
View More
10/100/1000m SFP FTTH Epon Fiber Optic Transceiver Single-Mode Ethernet Switch
The 1L2E SFP (Small Form-factor Pluggable) Transceiver is a compact, hot-swappable media converter that enables flexible fiber-to-copper network connectivity. It features 1 SFP fiber slot (for single-mode or multi-mode modules) and 2 Gigabit Ethernet RJ45 ports, making it ideal for extending fiber links while supporting copper-based devices.
Characteristics
  • Gigabit one-optical two-electric optical fiber transceiver
  • The fuselage is made of frosted painting
  • The thickness of the cold-rolled plate of the shell up to 0.8mm
  • High-speed up to 10/100/1000M
View More
Outdoor/Indoor FTTH 12 Core Wall-Mounted Termianl Fiber Optic Distributor Box
This splice closure is designed for fiber optic network cabling, suitable for both indoor and outdoor environments. It supports wall-mounted or pole-mounted installation, providing efficient fiber management and protection.
Characteristics
  • Dimensions of 240×220×60mm and lightweight (approx. 665g)
  • Saving space and enabling easy installation
  • Supports 12-core fiber splicing with 12 integrated fiber adapters
  • Meeting small to medium-scale fiber distribution needs
 
View More
AX3000 Wi-Fi 6 Wireless Router ZTE POLAR E1320
E1320 is an advanced Mesh AP with 5 antennas, which supports Dual-band concurrent 11ax Wi-Fi(160MHz@5GHz). One more antenna enables E1320 with stronger signal, faster wetwork and stronger wall penetration capability. E1320 complies with the EasyMesh standard to provide whole home Wi-Fi coverage. With its ultra-high Wi-Fi speed and optimized QoS, this device brings you the ultimate Wi-Fi experience.
Characteristics
  • 160 MHz Ultra-wide Bandwidth
  • One more signal channel in the 5 GHz band
  • 5-antenna Omni-directional Acceleration Seamless Indoor Coverage
  • IPv6 Support and lPv4 Compatibility
View More
Optical Cable Accessories Long Span Pre Tension Set Clamp Opgw ADSS Fitting
ADSS Helical Tension Set is mainly used for ADSS installation on strain tower/pole, angle tower/pole, or dead-end tower/pole. According to span length or tensile strength of optical cable, ADSS Helical Tension Set is divided into three different kinds, which include Short Span ADSS Tension Set, Medium/Long Span ADSS Tension Set.
Short Span ADSS Tension Set: Less than 100m span
Medium Span ADSS Tension Set: 200m-400m span
Long Span ADSS Tension Set: longer than 400m span
Characteristic
  • Hold up to 95% of the rated breaking strength (RBS) of the guy wire
  • Meets ANSI C119.4 standards for holding strength and durability
  • Pass ASTM B117 salt spray tests for over 1,000 hours
  • Simple structure and easy installation
  • Uniform stress distribution of fixtures and improved seismic resistance
  • Can replace common wire clamps
View More
35mm2 400V Highest System Voltage Waterproof Power Cable Splicing Kit
The cable junction box is injection molded from high-quality polycarbonate material, which is resistant to high and low temperatures and deformation. The sealant we choose is high-quality AB-type resin sealant, which can quickly solidify in 15 minutes. Our wide range of tool kit accessories are simple and convenient to use.
Characteristic
  • Connect the cables and wrapthem with insulating tape
  • Select the cable inlet & outlet sizeaccordingto the diameter of the cable. Youcan use saw to cut it to match the cable
  • After connecting the cables with theconnectors,wrap the sponge strip aroundwhere the cable enters and exits the box
  • Fasten the upper and lower covers of the waterproof box and wrap both ends with tape
  • Mix the glue and pour it into the boxand close the lid
  • Wait 15 minutes for the qlue to solidifyand you can use it normally
View More
U70b IEC Standard Type Glass Suspension Insulators for High Voltage Lines
U70B IEC Standard Type Glass Suspension Insulators for High Voltage Lines
Glass Suspension Insulators ensure safe, efficient power system operation, isolating and supporting conductors.
Characteristics
  • Comply with/exceed GB, IEC standards.
  • Durable tempered glass resists environmental stresses.
  • Diverse types/sizes fit varied high - voltage needs.
  • Transparent for easy maintenance inspection.
  •  Recyclable, eco - friendly for sustainable infra.
  • High - strength, long - lifespan, reliable for power transmission
View More
Preformed Armour Rods Insulation Piercing Connectors Insulation Fittings Suspension Clamp
Insulation Fittings: Suspension Clamp, Preformed Armour Rods, Insulation Piercing Connectors
This ADSS cable fitting set is engineered to ensure reliable overhead cable installation and maintenance, integrating cutting-edge materials and precision craftsmanship for superior performance.
Characteristics
  • Industry Standard Compliance 
  • Precision-engineered Structure
  • Broad Application Range
  • Effortless Installation
  • Extreme Weather Resilience
View More
Indoor Communication Cat7 CAT6 Cat5 UTP Unshielded Stranded Network Copper LAN Cable
Cat6 is a "4 twisted pairs" network cable used for 1000Base-T Ethernet applications up to 550MHz,and can also provide at speed of 10G rate with up to 37 meters transmission distance. It is backward compatible with the Cat5/5e standard. Cat6 cabling is suitable for office and building wiring, such as schools and shopping malls. This cable is perfect for all your advanced networking installations.
Characteristics
  • CM Rated for Use in Office Environments Such As Desktop Cable Connection
  • Up to 550MHz with 1G/10G-T Speed, Support PoE/PoE+/PoE++ (IEEE 802.3af/at/bt)
  • Tested with a DSX-8000 Versiv Cable Analyzer
  • Fully Compliant with ANSI/TIA-568.2-D Fire and Safety Standards
  • Support Solution Testing and Validation, And Can Provide Demo Testing
  • Marked Every 1m on Cable Makes Measuring Easy
  • Multiple Colors&Lengths to Help Organize and Simplify Complicated Cable Runs
View More
Fpv Optical Equipment High Efficiency No Damage Maximum Winding Length Fiber Optic Rewinding Machine for Drones
Drone fiber optic winding equipment is used to wind large rolls of optical fiber onto small fiber optic spools and load them into drone fiber optic boxes for communication.Drone optical fiber winding can be used for external line winding method, and the longest winding length is 30km.
Characteristics
  • Intelligent touch screen control system, which is simple to operate and easy to get started with
  • It is specially used for the optical fiber winding of FPV (First Person View) drones. The wire unwinding is smoother, and the communication signal is excellent
  • It supports the single-side layer increment function of the optical fiber wire drum for FPV (First Person View) drones
  • It supports the function of accelerating and decelerating at any time during the winding process
  • It is possible to control the winding tension by installing a mechanical or magnetic tensioner, so as to achieve a good winding effect
  • All the links that come into contact with the wire are made of ceramic material, which can effectively protect the optical fiber from being damaged during the winding process
  • It can automatically detect the winding speed. The S-shaped acceleration and deceleration function at the start and end of the winding process can reduce inertia, making the length measurement more accurate and providing a better wire protection effect. The maximum winding length can reach 15 kilometers
  • It is suitable for mass production of optical fiber drums
View More
110/220/500kv High Voltage Transmission Line Galvanized Steel Pole Power Towers
Hexagonal double-circuit towers are a specialized type of transmission structure designed to carry two independent three-phase circuits in a compact, space-efficient hexagonal arrangement. These towers are commonly used in high-voltage (HV) and extra-high-voltage (EHV) systems (e.g, 230kV, 400kV, or 500kV) where right-of-way constraints demand optimized land use. Their geometric design enhances mechanical stability while maintaining safe electrical clearances.
Characteristics
  • Allows two circuits to be supported on a single tower, reducing corridor width by up to 40%
  • Improves wind and ice load resistance
  • Centralized conductor arrangement simplifies inspection and repair
View More
High Voltage Electrical Digital Impulse Portable High Pot Insulation Tester
This Insulation tester integrates analog, digital, and mechanical advantages for insulation resistance testing, featuring strong anti-interference, high short-circuit current, and suitability for large transformers and substations.
Characteristics
• Combines analog, digital, and mechanical operation strengths
• Anti-electric field interference up to 2mA (50Hz)
• Typical short-circuit current 10mA for large-capacity/inductive tests
• Suited for on-site 500,000V transformer insulation measurement without wire disconnection
View More
8MP Smart Hybrid Light Fixed Dome Network Camera
This 8 MP Smart Hybrid Light Fixed Dome Network Camera enables high-definition imaging, smart target detection, and reliable surveillance with hybrid light tech, efficient compression, and durable features.
Characteristics
• 8 MP resolution for high-quality imaging
• Support Human and Vehicle Detection
• Smart Hybrid Light with long range
• Efficient H.265+ compression technology
• Optional on-board storage up to 512 GB (SD card slot)
• Built-in microphone for real-time audio security
• IP67 water/dust resistance and IK08 vandal resistance
View More
2MP Fixed Bullet Network Camera with Long IR Range
This 2MP Build - in Mic Fixed Bullet Network Camera enables clear imaging, efficient data compression, and reliable surveillance with advanced backlight handling, night vision, and durable features.
Characteristics
• 2 MP resolution for high - quality imaging
• Efficient H.265+ compression technology
• Clear imaging against strong backlight due to DWDR technology
• IP67 water and dust resistance
• EXIR 2.0 advanced infrared technology with long IR range
• Support up to 256 GB SD card storage
View More
8MP Smart Hybrid Light Fixed Turret Network Camera Human And Vehicle Detection
This 8 MP Smart Hybrid Light Fixed Turret Network Camera delivers sharp imaging, enables smart human and vehicle detection, and ensures reliable surveillance with advanced lighting, two - way audio, and durable design.
Characteristics
• 8 MP resolution for clear imaging
• Supports Human and Vehicle Detection
• Smart Hybrid Light for long - range visibility
• Efficient H.265+ compression technology
• Supports on - board storage up to 512 GB (SD card slot)
• Built - in two - way audio for real - time security
• IP67 water and dust resistance
View More
Hikvision 5MP Fisheye Camera for Retail Stores 180° Coverage WDR for Clear Views
This 5MP Fixed Fisheye Network Camera  offers an 180° fisheye view for wide coverage, uses efficient H.265+ compression, ensures clear imaging against strong backlight with 120 dB true WDR, and has an audio and alarm interface for comprehensive indoor surveillance.
Characteristics
• 5 MP resolution
• 180° fisheye view
• Efficient H.265+ compression technology
• 120 dB true WDR technology
• Audio and alarm interface available
View More
Optical Communication Solution Provider
Shanghai Fiber Cloud Communication Technology Co., Ltd. Fibercloud is an optical communication solution provider of optical fibers, optical cables, special optical fibers, and special optical cables. Fiber Cloud is headquartered in Zhangjiang High-Tech Park, Pudong, Shanghai, China. Over the years, we have accumulated rich and professional product knowledge in the optical communications industry. Fibercloud not only provides high-quality products to customers at home and abroad, but also provides professional technical guidance for customers.
We acknowledge customer's stringent quality demands for optical fiber products and pledge to supply products meeting international standards. Fibercld hopes to provide excellent services to our friends all over the world with quality and professionalism.
10
+
30,000
m
2
30
+
24
hour

Our Partners

Fibercloud not only provides high-quality products to customers at home and abroad, but also provides professional technical guidance for customers.

Provide Customized Solutions

Shanghai Fibercloud Communication Technology Co., Ltd. provides one-stop fiber optic communication solutions, covering optical fiber cables, equipment and intelligent management systems, suitable for multi-scenario applications.
 
Use low-loss optical fiber and intelligent optical cable management system, combined with WDM wavelength division multiplexing technology, to achieve high-bandwidth, low-latency interconnection of data centers across regions, reduce transmission loss and operating costs, and improve network efficiency and reliability.

Quality Certification

We are committed to the innovation of fiber optic communication technology, winning wide market recognition with our leading products and efficient services, and helping to upgrade the global network infrastructure.


Get Professional Fiber Optic Products and Support

Strict quality control ensures that products pass international certification, the failure rate is lower than the industry level, and is equipped with 7×24 hours after-sales support and rapid response services, and customer satisfaction continues to exceed 98%.
 
We committed to providing you with outstanding service and support. Please do not hesitate to contact us with questions or comments regarding our products.

Latest News

NEWS

Empowering Computing Power Infrastructure And Connecting The Digital Future

2025-05-29

Against the background of the deep integration of the digital economy and the real economy, Shanghai Xianyun Communication Technology Co., Ltd. has become a key force in supporting the construction of intelligent computing power networks with its technical accumulation in the field

READ MORE
2025-05-29

Shanghai Fibercloud Communication

2025-05-29

Shanghai Fibercloud Communication Technology Co., Ltd. Fibercloud is an optical communication solution provider of optical fibers, optical cables, special optical fibers, special optical cables. Fibercloud is headquartered in Zhangjiang High-Tech Park, Pudong, Shanghai, China. Over the years, we hav

READ MORE
2025-05-29

Empowering Computing Power Infrastructure And Connecting The Digital Future

2025-05-29

Against the background of the deep integration of the digital economy and the real economy, Shanghai Xianyun Communication Technology Co., Ltd. has become a key force in supporting the construction of intelligent computing power networks with its technical accumulation in the field

READ MORE
2025-05-29
Contact Us

About Us

Shanghai Fibercloud Communication Technology Co., Ltd. Fibercloud is an optical communication solution provider of optical fibers, optical cables, special optical fibers, special optical cables.

Quick Links

Products

Contact Us

  Add: Room 605, Building A, Lane 2419, Hunan Road, Shanghai, China
  Tel: +86-15800883766
  Email:  sales@fibercld.com
Copyright ©  2025 Shanghai Fiber Cloud Communication Technology Co., Ltd. All Rights Reserved.   Sitemap   Privacy Policy